Reducing Utility Bill Expense

Reducing Utility Bill Expense

As adults we all have to think about tedious things like reducing utility bill expense and the best part is, we do have to pay them.. When we were kids we always thought our parents were being mean when they said get out of the fridge, turn the light off when we aren’t using it, or don’t leave the faucet on, we never really knew why they were saying it. Now that we pay bills primarily utility bills we understand what they meant. Here are some money saving tips to keep our utility bills down.

Utility Bills

Utility bills are those annoying bills that the mail man delivers every month about the same time. Of course we have to pay them and most of balk at how expensive they can be. Paying these bills takes a lot of what we work for and can be overwhelming.

However not paying them means that we have no water, electricity, television, and gas and these bills just don’t go away we have to pay them. No pay means no services, which means we can’t eat, shower, do laundry or even store food.

When you look at these sky high bills and cringe at the thought of paying them, you sit back and start to evaluate what you can do to save money and make these bills affordable. So to help you with that we want to give some tips on the biggest utility bills.

Reduce Electricity Usage

Electricity is what we use to keep our house cool, food cool, water warm and lights on. This service can be abused the most with everyday living. We all want to hide from the heat, so we use AC in our homes if we keep our thermostat at 78 or higher our ac runs less and we use less energy.

Turning lights off when not in the room or they are not needed is a great help too, most lightbulbs are not energy efficient and even for a little thing they can burn up some energy. Make sure that appliances are running properly and set at proper temperatures. While these are all great tips not just one of them will show much savings, but when done together consistently the savings add up.

Water Conservation

Water is used by everyone in the world for one thing or another. Not only is water a valuable resource that can be depleted we also pay for our water usage and that can get costly. We can cut these costs by being aware of what we are using. When showering take quick showers, wash up and get out.

Measure loads of laundry so that water is wasted and costing us extra. Make sure that all faucets are water saving and there are no leaks or drips. Make sure that toilets are water minimizing and that all the seals are good so there are no leaks.

Phone Services

Phone service can be tricky, we all feel the need that we need to have a way to call for help. Most of us pay for a cell phone and a landline. By eliminating one of them usually the landline we can save that money.

Our cell phone will work almost anywhere and a landline even with no service will still call emergency number. You can get on a prepaid plan for cellular service that has unlimited everything. There are a lot of great packages out there for phone service.

We work hard for our money, so why not try to save as much as we can. We can cut corners on certain household bills and services. Not only do we save money but we can conserve our resources. So these tips are all great ways to save the money we work so hard for and bring attention to our wasteful habits. Now we all have a clear understanding of why our parents told us to turn lights off, close the fridge and stop wasting water!


3 Tips To Save Electricity

3 Tips To Save Electricity

Nowadays it has become important to pinch every penny we can when it comes to paying our bills. In the age of technology, we find that our electricity bill often comes out as one of the heaviest bills. Some of the best ways to save on your electricity bill include the following 3 little known tips!

1. Upkeeping Your Appliances

The quality of your appliances often degrades after each use which can make them less efficient. The less efficient they are, the more electricity you need to use to get the job done like restarting your dryer in order to dry your laundry load. Therefore, maintaining your appliance is a must-do to help you save on your electricity. You can maintain your appliances by:

  • Cleaning them weekly or after each use (cleaning the lint trap, clearing out the dishwasher, or cleaning the AC)
  • Make sure appliances with bulbs have the right watts and bulbs
  • Be sure you are using the appliance correctly (loading dishing into the dishwasher correctly or using the right microwave setting)
  • Putting them in the right location (a thermostat can be effected by direct sunlight and drafts)

The better maintained your appliances are, the better they will perform. You will be surprised how much electricity you can save by keeping your appliances in tip-top shape!

2. Using Cold Water

Speaking of appliances, studies have shown that you can save up to $63 a year when using washing laundry with cold water. The hot water you use to wash clothes AND shower adds up at the end of every month. You can cut the amount of hot water you use by only using cold water for your laundry. Not only will you find that using cold water to wash laundry helps you save on your electricity bill but it also has other benefits. Cold water is known to:

  • Not mistreat your clothes’ fabrics
  • Maintain elasticity of clothes with elastic bands
  • Prevent the growth of bacteria on your clothes and in your washer
  • Maintains the shape of your clothes

Overall, there are plenty of good reasons to switch to using cold water when doing laundry. The biggest and best reason is that using cold water can help you save on your electricity bill.

3. Unplugging Standy

Another little-known tip for saving on your electricity bill, is to unplug electronics that are on standby. When an electronic is on standby, it means that the appliance is plugged into a socket, is put on standby mode and is not in use. Putting the electronic on standby can save more money than having them plugged in but not as much than if they are unplugged. The best solution is to plug a safe amount of electronics into a power strip or a smart outlet.

By using a power strip or smart outlet, you can just switch it on when you are using one of the electronics and just switch it off when you’re not using one. You will find that you can save up to 10% on your electricity bill using this method.

Call Christian Brothers AC, Plumbing & Electrical at 623-499-9794.


Stay on Top of the Electrical Hazards in Your Glendale Home

Electrical Hazards in Your Home

The modern world is almost totally dependent on electricity. From the moment you hit the button on your alarm clock, you’re using some form of electricity. In fact, it’s so incredibly integrated into modern life that most people take it for granted and forget it’s even there.

When people forget about electricity, problems can arise. Every year, thousands of house fires are caused by faulty electrical outlets. Several other common electrical problems are responsible for tens of thousands of fires.

Glendale, AZ -ElectricianThere are five electrical problems that seem to occur far more often than the rest. Once you know about these problems, they become easier to watch for, so you can prevent a devastating fire from ravaging your Glendale home.

Too Much Plugged Into Power Strips

A top electrical hazard that could be lurking inside of your home is an overloaded power strip. For people who live inside of a smaller home, such as a studio apartment, it can be very tempting to overload power strips.

Problems can arise when multiple power strips are plugged into the same outlet. The risk increases when both of the power strips are heavy-duty models, which means they have room for as many as 12 different devices. If both strips are completely overloaded, they could provide electricity to over 24 different devices.

Using power strips like this is just asking for trouble. For optimal safety, never plug more than one power strip into a single outlet and keep the number of devices plugged into the strip as low as possible. It’s also important to avoid using power strips for space heaters, microwaves and refrigerators because they’re not made to be plugged into a power strip.

Too Many Extension Cords

Like power strips, extension cords can create an electrical hazard. It’s true that extension cords can be very helpful, but when they’re used for too long, they can start a fire. All extension cords are meant to be used for a short period of time, so when you don’t need them, unplug them and put them away.

We also recommend never running extension cords through walls or ceilings because doing so can cause them to overheat. Also, indoor extension cords should never be used outside, but there is nothing wrong with using outdoor cords inside and outside.

Faulty and Defective Wiring

Quality wiring should always follow the latest guidelines and safety standards. The best way to make sure your home wiring follows these requirements is to have a professional electrician install your wiring. It’s never a bad idea to have professionals come out and inspect your home’s electrical system.

We can check the system and diagnose any problems that we find. You should never, under any circumstances, attempt to perform your own electrical wiring. This is one of the quickest ways to guarantee your home will catch fire. Poor or defective wiring is another top electrical hazard. There are several signs of defective wiring:

  • Fuses that are always blowing
  • Lights that constantly flicker
  • Wall outlets that have become discolored
  • Appliances making a burning smell
  • Switches and outlets that are always hot when touched
  • Breakers that constantly trip

If you see any of these signs in your home, you should never try to fix them. The best option is to call a professional electrician. We can diagnose any electrical problems inside of your Glendale home and fix them before they have a chance to start a fire.

Misplaced Space Heaters

One of the top electrical hazards is an overheated space heater. Since almost every space heater is portable, Glendale homeowners tend to move them constantly. Problems occur when a space heater is placed too close to flammable objects.

For example, it’s not uncommon for homeowners to place space heaters near rugs, couches, beds and curtains. There should always be three feet of space between your space heater and other objects. It’s also important to never leave a space heater unattended while it’s turned on.

If possible, you should also try to avoid purchasing space heaters that have coils. The problem with coils is that they get so hot that they have the potential to instantly ignite most flammable objects.

Light Bulbs Used Incorrectly

Light bulbs have been around for such a long time that most people don’t even think about them. When a bulb stops working, a typical homeowner will drive to the store and purchase new bulbs. The problem is that not everyone knows what bulbs to buy.

Glendale, AZ -Electric-ServicesThere are specific bulbs made for specific types of fixtures. It’s very important to read the label on your light fixture and find out what type of bulb it takes. Most fixtures call for a 60-watt bulb or equivalent. If you try to run a 120-watt bulb in the 60-watt fixture, you run the risk of causing a fire.

You can also run into problems when you try to use a 60-watt bulb in a 120-watt fixture. The wattage of your light bulb should always match the wattage that the fixture is rated for. You should always make sure bulbs are screwed in very tightly and never place any type of cloth over a light fixture because it can cause the material to ignite.

These are the top five electrical hazards that could be lurking inside of your home. If you’re ever having electrical problems, it’s very important to call the professionals. If you try to fix the problem yourself, you could get electrocuted or cause a catastrophic house fire.

Electrical problems might seem like they can be fixed easily, but the reality is that electricians must spend a huge amount of time in school because there is so much to learn about electrical circuits. Professionals know how to fix common electrical issues and avoid getting electrocuted. We can make sure your home is properly wired and answer any other questions that you might have.

Having electrical issues within your Glendale, AZ home? Call Christian Brothers Plumbing, Air Conditioning, and E

 

 

rical today at 623-499-9794.


DIY Jobs Gone Wrong

DIY Risks Of Installing Ceiling Fans And Chandeliers

Installation Isn’t As Easy As It Seems

Glendale, AZ Electrical-Services-300x300Looking at a ceiling fan may make one think that it’s easy enough to install, so many may try to do it themselves, and this can be a big mistake. You may have seen some DIY jobs gone wrong.

Some may get lucky and install a ceiling fan with no problems, but there are many hazards when it comes to electrical work, and problems can range from a non-working unit to a fire hazard.

Even if you want to install a chandelier in your Glendale, it can still be a problem because connecting the right wires is still necessary to get chandelier working properly.

Chandeliers can also be heavy, and if they are not installed properly, then you may have a big missile overhead that can fall at any moment, and the same goes for a ceiling fan.

The Risks Involved

There are many big risks involved when working with electricity, and some who try to install chandeliers or ceiling fans on their own may not even be wise enough to know that they have to turn off the electricity before doing any installations.

Even those who have the outlet off may still not connect the wiring properly, and this can lead to electric sparks coming from the wiring once the unit is turned on. Sparks can lead to a fire hazard, which can ignite in the room where the chandelier or ceiling fan has been installed.

Even if the ceiling fan is put together properly, if it’s not secured in place on the ceiling, then it’s likely to fall after it’s turned on, and this can be a great hazard for those who are under the fan when it’s spinning.

With all the hazards that are possible by installing a fan or chandelier on your own, it may be best to get a professional to do it instead, especially since it will be done right the first time, it’s low in cost, and you have more options available to you.

A Professional Can Give You More Options

A professional can install a chandelier or ceiling fan in your Glendale home and give you the option of a separate switch to turn off the light and leave the ceiling fan on or vice versa.

It’s also possible for a dimmer switch to be installed, giving you the option of lower lighting from a chandelier or a ceiling fan, which is something that’s unlikely to be done by someone who’s doing it themselves.

Don’t hurt yourself in your Glendale, AZ home by trying to install a ceiling fan. Call Christian Brothers Plumbing, Air Conditioning, and Electrical at 623-499-9794 today, and get an expert on the job.