The Ultimate Guide To Heating Options For Your Home

The Ultimate Guide To Heating Options For Your Home

When faced with a decision, its always best for a homeowner to know their options. It seems like whether its choosing a stylish tile for your floor, deciding exactly where to put each piece of furniture, or selecting the correct heating system. Your choices matter greatly. This is why its always best to know every option. Even when it comes to your home heating. But, finalizing a decision without exploring every possible choice can leave you wondering if you made the correct one.

As a homeowner, feeling like your home heating choice isn’t up to par can lead to wasted money, lost time, and needless frustration. To make matters worse, finding the data necessary to make the right choice can cause a big headache. Not to mention knowing how to apply this data correctly to your situation is almost impossible. When it comes to knowing heating options, nobody wants to left out in the cold.

Christian Brothers wants every homeowner to know exactly what their options are with heating systems. We know how valuable information can be when it is accurate and easy enough to understand. This is why we’ve put together the ultimate basic guide describing each heating option for your home:

Fireplaces

We’ll start with the basics. Great for decoration and overall comfort, a fireplace fits any home perfectly. However, due to modern technological upgrading, fireplaces are not recommended as a primary heat source. Although great for a family gatherings, you may want a more convenient source of warmth for your home.

Space Heaters

Electric space heaters are very convenient and easy to use. They move easily around the house due to their small size and light weight. Furthermore, they heat a small area very quickly to provide maximum comfort.

Being quartz infrared or oil filled most of the time, these heaters deliver heat converted by electricity. This may sound great, but it comes with a steep price. Space heaters are cheap to buy initially, but your electric bill will skyrocket if they are used too much.

If you were to use a 1,500 watt electric heater for an hour, your electricity cost would go up in cents by 50%. This isn’t the only reason why space heaters aren’t a valid recommendation. They can be a worrisome fire threat as well. Plus, they don’t heat the entire home. They only provide small areas with heat.

Boilers

Operating as both air and water heaters, boilers distribute heat by circulating warm water through radiators and other devices. These radiators are typically located in bedrooms and offices. When the water circulating into these devices eventually cools down, it streams into the boiler again. This reheating process ensures your boiler is running at top efficiency. Similarly to other types of heaters, a boilers heat source is usually natural gas or oil based heat.

Boilers are perfect if you choose to have radiant floor heating. If you have a steam boiler, the process is a tad different. This boiler creates steam which is carried into the home through ducts and vents. This type of boiler isn’t used very commonly any more due to the more convenient options of heating that are becoming more popular.

Regular boiler heating systems come with their own set of pros and cons. They are typically easier to install if you’re looking to put “zone” thermostats in your home. With zone thermostats, you’re able to control the temperature of a single room. This can be useful when it comes to managing the heat production in your home. However, the cost of boilers is substantially more than most other heat sources.

Heat Pumps

Normally described as a two way air conditioner, heat pumps can provide coolness to your home in the summer as well as heat for you in the winter. They do this by simply removing hot air from the home. Thanks to an electric device attached to the mechanism that ejects improper temperature air outside, this system is ideal if you want an option that works relatively similarly to central air. When it comes to heat pumps, you have a couple of different options.

The first option is an air source based heat pump. This option operates much like the previous paragraph explained. Cold air is taken from outside the home, charged by an electrical component, and pushed into the home. In the summer, warm air is removed from the home. The installation process for this is relatively similar to that of central air.

The other option is purchasing a geothermal heat pump. Geothermal heat pumps work by taking heat from underground and converting it into warm air. The expenses that come from installing and maintaining geothermal heat pumps are very high. Due to the high expenses, this heat pump is not a great recommendation.

Furnaces

Central heat furnaces heat most of the homes in the United States, and for a good reason. They are the number one recommendation for most homes because of their “forced warm air distribution system”. Their high recommendation also comes from their growing technological efficiency over the past thirty years. Furnaces create warm air by mixing it with burning oil. Pushing the air through the vents and ducts of the ventilation system, they are able to heat every part of the house.  A fan propels the warm air from one part of the house to the other.

A furnace can also be completely controlled with the help of a thermostat, making them even more convenient than fireplaces, heat pumps, or electric heaters. Furnace efficiency can also be measured more accurately using the AFUE measurement. The higher the percentage calculated, the better efficiency at which the furnace runs. Furnaces are a number one recommendation when it comes to heating.

Call Us

If you have any questions regarding heating, electricity bills, or HVAC systems, give us a call! We can set you up with an HVAC technician who specializes in air conditiong, heating, and customer service. You can reach us at (623) 499- 9794.


Have You Noticed Your Glendale Heater Blowing Out Cold Air?

Why Your Heater Is Blowing Cold Air

Heating can be taken for granted until something goes wrong. In many cases, it can be on an extremely chilly day causing a little panic as to what to do.

Perhaps the most scariest situation is when your HVAC System seems to be working fine, but only cold air is coming out.

Glendale, AZ heating_services

Is your heater blowing cold air?

Regardless if the fix is easy or more complex, HVAC Professionals are well-versed in diagnosing and fixing the problem. Even though Furnaces are designed to be resilient, it is important to schedule annual maintenance for those systems. Doing so will help prevent those slowly developing problems from becoming emergency repairs.

Every Furnace is typically made of four components: The Fuel System, Burners, Fans and Ductwork .In order for your Heater to function properly, all components need to be working.

In the case of Heat Pumps, the air circulated is slightly lower than body temperature, and many think the heating coming from the Ductwork is not working, when in fact it is. However, there are times when Heat Pumps and other kinds of Heaters really are blowing out cold air. Here are the three main reasons why:

1. Faulty Controls/Thermostat

Sometimes the reason for cool air is as simple as a thermostat turned to the cool setting, or in many cases, the batteries are not working on a digital thermostat. This is one of the first things an HVAC Professional will check.

Newer HVAC Systems rely on computer automation, and like a Personal Computer, a glitch can occur which may cause the system to lock. The reasons for this kind of malfunction are numerous, ranging from dirt to power surges, but the overreaching problem is something caused the limiters to shut off.

A Furnace may appear to be functioning, but the automation is not allowing fuel delivery. As a result, the fan is only blowing cold air through the Ductwork.

This is a common problem HVAC Professionals find and they are capable of determining if there is a component that needs to be replaced or if the existing hardware can be fixed.

2. Damaged Ductwork/Clogged Filters

This problem has the tendency to develop slowly. In other words, the air coming from your Glendale home Furnace may feel cooler than normal, but progresses over time to a point where service is required.

Additionally, this problem can be costly from an energy perspective because an HVAC System has to work harder in an attempt to get temperatures to desired levels. Over an extended period of time, the life cycle of a Heater may be shortened.

As a filter becomes clogged, the harder it becomes to get warm air to push through for proper Heating. In addition to the thermostat, checking the Furnace Filter is one of the first things an HVAC Professional will do to diagnose why the Furnace is blowing out cold air.

What may be more insidious are problems with the Ductwork. The Heating System can be fine on all fronts, but could still blow out cool air throughout, or possibly create hot or cold zones in a building.

This is all contingent on where holes or unhinged Ductwork lies. Depending on the nature of the problem, it could be slowly developing or an instant problem, and an HVAC Professional will carefully examine all of the venting framework to see where the problem lies.

Again, annual maintenance will catch these problems more often than not, but occasionally something else can cause a problem, such as construction or bumping into something, that will require immediate attention.

Glendale, AZ heater_repair_service3. Burners

With newer Gas Furnaces, a Burner replaces the old pilot flame. These work in the same manner as an incandescent light bulb filament. When the furnace is on, the burner will heat and glow orange, igniting the Fuel Source creating heat to be blown through the fan. In the case of Electric Furnaces, these elements create the same environment for the fan.

The problem could lie with a single igniter or a series of elements and replacement is specific to the kind of HVAC System used. Your HVAC Professional will not only find the right component for replacement, but is qualified to install it in a high voltage environment.

Regardless of the situation, HVAC Professionals can not only provide comfort but piece of mind when a Furnace is malfunctioning with guaranteed repair.

If your Heating System is blowing out cold air, not working the way you think it should, if your utility bills seem higher than normal, or it’s been over a year since you’ve had routine maintenance, you should schedule an appointment at your convenience. See Summer Savings For Your Air Conditioning.

For quality service and peace of mind in the Glendale, AZ area, call Christian Brothers Plumbing, Air Conditioning, and Electric today at 623-499-9794..


Are You Aware of the New HVAC Technologies?

The Latest HVAC Technologies

Residential HVAC systems have been around for quite some time, but that doesn’t there isn’t any room for improvement. Countless new upgrades and features have made these systems more efficient and useful than ever.

Glendale, AZ Heating-and-Cooling-System-TechnologiesHere is a closer look at some of the hottest new HVAC technology and what it can do for your and your family.

WiFi Thermostat

Long gone are the days in which someone actually has to be at your home’s thermostat to adjust the temperature.

WiFi thermostats allow Glendale homeowners to control their HVAC system from anywhere in the world through their smartphone or tablet PC.

In addition to being extremely convenient, these devices can also save you money by giving you full control over when the heating and cooling systems turn on and off. These devices can also provide useful feedback such as when the air filters need to be changed or if the system needs to be serviced.

Ductless Mini-Split Air Conditioners

In many Glendale homes and businesses, it is not practical to have ducts running to every single room in the building. This is why many people have turned to ductless mini-split air conditioners for zoned climate control. Instead of drawing in cold air from a centralized system, these devices produce the cold air on their own.

They are installed on an outward facing wall and pull in the air without using ducts. For many families, this will save quite a bit of money as they are only cooling a single room instead of their whole house.

Radiant Heating

Radiant heating is not exactly a new concept, but this technology is now being applied to a variety of amazing new HVAC devices. Unlike traditional furnaces, radiant heaters do not use a heating source such as an open flame to keep the house warm. Instead, these heaters actually produce the same rays as the sun.

They can be installed in walls, floors, or even the ceiling for zoned climate control. Radiant heaters also begin working instantly and will stay warm for quite some time after they have been turned off. Due to the fact that they do not have any moving parts, they require very little maintenance and rarely break down.

If you are a resident of Glendale, AZ would like to learn more about some of the latest HVAC technology,call Christian Brothers Plumbing, Air Conditioning, and Electrical today at 623-499-9794.


Take a Step Back in Time and Learn About Your HVAC System

History and Revolution of Home Heating Systems

The discovery of fire and learning how to create and control it were two of the most important discoveries in human history. Fire not only enabled humans to cook their food, it also helped them to keep warm.

Those cave fires were an early step in the creation of home heating systems. The history of the home heating systems people use today is a long and interesting one.

Glendale, AZ History and Revolution of HVAC SystemsTaking a Step Back in Time

It enabled humans to settle in colder climes. While humans have been heating their dwellings for thousands of years, the home heating systems in use today can be traced back about 150 years.

Archeological evidence shows humans used fire to warm their caves about 1.2 million years ago. Home heating systems have come a long way since then.

Ductwork, recessed wall heaters, tiny, mobile, heaters, heaters using electricity or natural gas, durable heaters made with advanced, lightweight metals, and heating elements made of ceramic materials, coils and tubes combined with electric blowers which channel the heat in any direction you want are available today.

The Ancient Romans

The ancient Romans are credited with creating the first sophisticated central heating system. Their system, called Hypocausts, is said to have channeled hot air created by a fire through pipes which ran under floors and behind walls. The ancient Koreans and Muslims were said to have had similar systems.

Prior to the 14th century, open hearths were used throughout the world to both cook food and warm homes. The invention of the chimney in the 14th century allowed the common man to better control the heat and smoke from their fires.

The 17th century saw the spread of wood and coal burning stoves to make fire to cook food and heat the home. In Russia in 1855 Franz San Galli created the first radiator.

It warmed homes by pushing hot liquids through metal pipes. Dave Lennox took it a step further by manufacturing and selling steel coal furnaces which used natural convection to spread the heat.

Albert Marsh’s Discovery

Albert Marsh’s discovery of the alloy Chromel improved home heating systems and led to the development of electrical heating elements. Alice Parker, an African American woman, invented the gas furnace in 1919.

Oil, gas, and electric furnaces keep hundreds of millions of people worldwide warm every day in their Glendale homes. Electric furnaces are popular because they cost less to purchase, install, and use. However, in the U.S. today natural gas furnaces are the most popular in Glendale homes.

Interested in taking a closer look at your Glendale, AZ HVAC system? Call Christian Brothers Plumbing, Air Conditioning, and Electrical, today at 623-499-9794 today.


The Importance of Your HVAC System

Choose The Right HVAC Repair Company

Why Your HVAC Unit Is Important

Glendale, AZ Energy-Efficient-ServicesAlthough HVAC units may differ from one another, they all ultimately do the same thing in a home. An HVAC unit is something that can help to keep the Glendale home warm or cool, depending on the weather outside.

If it’s cold outside, the HVAC unit will help to keep the home warm, but if it’s hot outside, then those with an HVAC unit that has AC and heat can turn the AC on to keep the home cool.

Since the HVAC unit creates an atmosphere inside the home when it’s on, it’s necessary to have a good repair person to fix it if something goes wrong, especially when the weather is extreme outside.

Make sure to choose an HVAC repair person ahead of time, and then you’ll know exactly who you can call when you have a problem with your unit or if it needs maintenance.

Is Your HVAC Repair Person Licensed, Insured, And Bonded?

Anyone who is coming out to work on your HVAC unit should be bonded, insured, and licensed. You’ll want to make sure they have a license to do the job, and they also should be bonded, meaning that a bonding company will back them up if there is a claim made by a customer due to their negligence or mistake.

You also want to make sure that the person is insured, and this means that if a worker is ever hurt on your property for any reason, then you won’t be held responsible.

Check Their References And Reviews

Even if a Glendale HVAC person is licensed, bonded, and insured, you still want to check their references as well as any reviews that may be out there about them. Reviews can be online or on paper, and they are from a customer or someone who has worked with the HVAC repair person or company or before.

Reviews can be very helpful when you’re trying to make an ultimate decision on which HVAC repair person to choose, and references are even better because they’ll come directly from someone who recommends the repair person to you.

Get A Written Estimate

An estimate is necessary before any work can commence, and you’ll want the estimate in writing. If the person only tells you what it will cost over the phone and gives no written estimate, then pass them up and go to someone else who will give written details of your potential upcoming costs.

Need your HVAC inspected in your Glendale, AZ home? Call Christian Brothers Plumbing, Air Conditioning, and Electrical at 623-499-9794 for our services.