X
    Categories: Glendale Air QualityThermostat Installation

Malfunctioning thermostat? 5 Ways to Investigate

Malfunctioning thermostat? 5 Ways to investigate

For quite some time, the thermostats used to control HVAC systems have been unsightly chunks of metal. Once most electronics started going digital, dramatic improvements were made to HVAC thermostats. They were digitized and given bright display screens. The modern thermostat is the epitome of convenience. It places all of the important information at your fingertips. If you want, you can let the thermostat run in the background and completely automate your home’s climate control. However, if the thermostat starts to malfunction, it won’t take long before your personal comfort is left in shambles. There are five ways to tell if you have a malfunctioning thermostat.

Erratic Display or Blank Screen

The programmable thermostat has changed the way Glendale homeowners control heating and cooling. While it has revolutionized the way homeowners control their HVAC system, it’s not exempt from its fair share of quirks. An easy way to tell if your thermostat is malfunctioning is to check for an erratic display or blank screen.

It’s a very common problem, and it also happens to be one of the most frustrating. Fortunately, it could also be an easy fix for us. If your thermostat’s screen begins to flicker or displays information that never changes, there is a good chance that it needs a new battery.

We’ve also seen cases that involved a thermostat that correctly displayed information but didn’t properly communicate with the HVAC system. This is one of the easiest problems that we can fix for customers.

No Response

To work properly, a thermostat must be installed in the correct location. You might have rooms inside of your home that are too cool or hot. This is almost always the result of a thermostat that isn’t correctly reading the temperature in each room, and in most cases, it’s caused by a thermostat placed in the wrong location.

A thermostat should never be installed in direct sunlight or inside the coldest area of a home. When the thermostat is installed in these locations, it will incorrectly read temperatures and can overheat or over cool rooms in your home.

If your HVAC system isn’t responding when rooms in your home are too hot or cool, there is a good chance that the thermostat is malfunctioning because it has been installed in the wrong location.

Cycles Are Too Short

Depending on the situation, this problem could be caused by a digital thermostat that has been calibrated incorrectly. If you’ve noticed your HVAC system cycles are too short, it could be a sign that the thermostat is malfunctioning and causing the system to shut off before it has finished heating or cooling your home.

This can be a particularly difficult problem to diagnose because most homeowners don’t even know it is happening. While this is frequently caused by a malfunctioning thermostat, it can also be caused by failing system components. To get to the root cause of the problem, it’s best to let the professionals inspect your HVAC system. We can come to your home and get to the root of the problem.

Air Conditioner Refuses To Turn On

If you’ve programmed your thermostat for a lower temperature, and it refuses to turn on, then there is a good chance that the thermostat isn’t working properly. When we come to your Glendale home to inspect this problem, we might try to replace the thermostat batteries and see if it makes a difference.

We’ll also check to make sure the thermostat is set on the proper setting because incorrect settings can prevent the air conditioner from turning on. It’s not uncommon for newer thermostats to develop all sorts of different problems, and these malfunctions can make your life very inconvenient.

The best way to solve these problems is to let us come fix them. We offer affordable thermostat repair services and have seen almost every HVAC problem imaginable. If your air conditioner refuses to turn on, it might also be caused by a dirty thermostat.

Over time, dust can collect on the thermostat’s components, which can lead to a wide range of malfunctions. The best way to prevent this from happening is to have your HVAC system serviced regularly. During each service visit, we can check your thermostat and make sure it’s clean and functioning properly.

Air Conditioner Doesn’t Maintain Correct Temperature

If your air conditioner can’t seem to maintain the correct temperature, then there is a good chance that your thermostat is malfunctioning. For example, maybe you’ve noticed your air conditioner is having trouble cooling throughout the day.

Maybe rooms that are near the thermostat aren’t getting as cool as they should. The problem could be that your thermostat is installed in a bad location, or the device might be malfunctioning and preventing the air conditioner from working the way it was designed.

Other Problems and Hiring Professionals

When a programmable thermostat is malfunctioning, it can cause a wide range of problems. In some cases, it might cause the blower motor to continue running when it should be shut down. Malfunctions can also cause the air conditioner to turn on and off too frequently, which results in a major increase in inefficiency.

Malfunctions can also cause the air conditioner to turn on and off too frequently, which results in a major increase in inefficiency.

If your thermostat is causing your HVAC system to run poorly, you’ll end up having to pay for the inefficiency with your wallet. To solve any existing problems and prevent problems from occurring in the future, it’s important to call the professionals.

As skilled HVAC professionals, we can fix any problems that your system might be having and help you set up a proper servicing plan. If you think your thermostat isn’t working correctly, there are a number of different things that we can check.

For starters, we’ll check to make sure it’s receiving power. We’ll check to make sure the fuse isn’t blown. We’ll also check to make sure the wiring is set up correctly. These are five ways to tell if your home’s thermostat is malfunctioning. Get it fixed with our thermostat repair services.

For remarkable services in your Glendale, AZ home, call Christian Brothers Plumbing, Air Conditioning, and Electrical at 623-499-9794..

Christian Brothers Plumbing, Air Conditioning, And Electrical :